+372 56630018
Do you have any questions? Ask!
Заказать обратный звонок
The company OU "Vibromera" is engaged in the development and manufacture of various devices for technical diagnostics and dynamic balancing of industrial equipment.

Guarantee

Subject to the rules of consumer transportation, storage and use in the event of failure of the device manufacturer guarantees free appliance repair at his place of manufacture within twelve months from the date of its receipt to the consumer.
Address of the company - manufacturer:

Estonia, Narva linn, Kreenholmi 39v
Phone :+372 56630018

FREE SHIPPING!

When purchasing products through Paypal - free shipping.

Отзывы

Оставить отзыв
Все отзывы (0)
Balancing set "Balkom-1" Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"
Balancing set "Balkom-1" Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"Balancing set "Balkom-1"

Balancing set "Balkom-1"

Portable balancer can be used when carrying out assembly, installation and repair works to decrease the dynamic loadings operating on bearing knots of machines owing to their unbalance. Thus the operation resource of machines and mechanisms raises significantly.
Use of a balancing set allows to exclude in many cases need for special balancing machines as balancing of a rotor is carried out in its own bearings without dismantling of the mechanism

All process of balancing including measurement, processing and indication infor-mation output on size and an installation site of the correction load is carried out in the automated mode and doesn't demand from the user of the additional skills and knowledge which are beyond the present instruction.

Цена: 1734 $
Question

1. DESTINATION

Balancing set “Balkom-1” is portable balancing set intended for balancing in one or two planes of correction of the rotors rotating in own bearings.

Balancing set includes: 2 sensors of vibration, phase corner sensor, measuring block, and also portable computer - the netbook or the laptop. (The use of the desktop computer is possible if needed).
It can be used when carrying out assembly, installation and repair works to decrease the dynamic loadings operating on bearing knots of machines owing to their unbalance. Thus the operation resource of machines and mechanisms raises significantly.

Use of a balancing set allows to exclude in many cases need for special balancing machines as balancing of a rotor is carried out in its own bearings without dismantling of the mechanism
If necessary balancing set (“Balkom-2C” in modification) can be also used as a measuring system of balancing machine.

All process of balancing including measurement, processing and indication infor-mation output on size and an installation site of the correction load is carried out in the automated mode and doesn't demand from the user of the additional skills and knowledge which are beyond the present instruction.

Results of all balancing remain in Archive of balancing and can be unpacked in the form of protocols.
Besides balancing the balancing set “Balkom-1” can additionally be used as vibrometer allowing to carry out measurement on four channels of the average quadratic value (AQV) of total vibration, RMS of a reverse component of vibration and also to con-trol the frequency of rotor rotation.

Besides, this balancing set allows to output the display of charts of temporary function and a range of vibration on vibrospeed that can be useful at an assessment of technical conditions of the balancing machine.

2. TECHNICAL FEATURES

2.1. Measurement range of the root-mean-square value (RMS) of the vibration velocity, mm/secfrom 0.005 to 50
2.2. The frequency range of the RMS measurement of the vibration velocity, Hzfrom 5 to 200
2.3. The limits of permissible absolute error of vibration RMS measurement on the base frequency (80 Hz) and in the operating band, mm/sec±(0.1 + 0.1*Vm),
Vm – the measured value of the MS vibration velocity
2.4. Number of the correction planes during balancing1 or 2
2.5. Range of the frequency of rotation measurement,rpm 300 - 30000
2.6. Limits of permissible absolute error of the vibration velocity measurement in the operating band, rpm±(1 + 0.005*Nm),
Nm – measured value of the rotor rotation frequency
2.7. Range of the vibration phase shift measurement, angular degreesfrom 0 to 360
2.8. Limits of the permissible absolute error of the vibration phase shift measurement, angular degrees± 1
2.9. Overall dimensions of the measuring unit, mm, max200*160*65
2.10. Mass of the measuring block, kg, max0.9
2.11. Overall dimensions of the vibration sensor, mm, max25*25*20
2.12. Mass of the vibration sensor, kg, max0.04
2.13. Mass of the phase sensor, kg, max0.4
2.15. Service conditions:
▪ air temperature, °C1 - 35
▪ relative humidity of the air at temperature25 °C, % < 80
▪ atmospheric pressure, kPa84 -106.7
2.16. Mean time between failures, hour, min1000
2.17. Average life, years, min6

3. DEVICE COMPONENTS AND DELIVERY SET

  • Measuring block -1
  • Non Contact phase sensor – 1
  • Sensors of vibration - 2
  • Magnetic stand - 1
  • Electronic scales -1
  • Case for device transportation -1
  • Documentation -1
  • Flash drive with software -1
Цена: 1734 $
Question

2017 © «OU "Vibromera"»

+372 56630018
Do you have any questions? Ask!
Заказать обратный звонок
Нужна консультация?