Balancing set “Balanset-4”

Name: Balancing set “Balanset-4”
Price: 6800.00
Availability: InStock

Balancing set includes: up to 4 sensors of vibration, phase corner sensor, measuring block, and also portable computer - the netbook or the laptop. (The use of the desktop computer is possible if needed).
It can be used when carrying out assembly, installation and repair works to decrease the dynamic loadings operating on bearing knots of machines owing to their unbalance. Thus the operation resource of machines and mechanisms raises significantly.

Цена: 6800 EUR

Question

1. Destination

Balancing set “Balanset-4” (further “Balancing set” or “Device”) is portable balancing set intended for balancing in one, two, three and four planes of correction of the rotors rotating in own bearings.

It can be used when carrying out assembly, installation and repair works to decrease the dynamic loadings operating on bearing knots of machines owing to their unbalance. Thus the operation resource of machines and mechanisms raises significantly.

Use of a balancing set allows to exclude in many cases need for special balancing machines as balancing of a rotor is carried out in its own bearings without dismantling of the mechanism

If necessary the Balanset-4 balancing set can be also used as a measuring system of the balancing machine.
All process of balancing including measurement, processing and indication information output on size and an installation site of the correction load is carried out in the automated mode and doesn't demand from the user of the additional skills and knowledge which are beyond the present instruction.

Results of all balancing remain in Archive of balancing and can be unpacked in the form of protocols.
Besides balancing the balancing set “Balanset-4” can additionally be used as vibrotachometer allowing to carry out measurement on four channels of the average quadratic value (AQV) of total vibration, RMS of a reverse component of vibration and also to control the frequency of rotor rotation.

Besides, this balancing set allows to output the display of charts of temporary function and a range of vibration on vibrospeed that can be useful at an assessment of technical conditions of the balanced machine.

2. TECHNICAL FEATURES

2.1. Number of the correction planes during balancing	1, 2, 3, 4
2.2. Number of channels of the vibration measurement	4
2.3. Number of channels of the rotation frequency measurement	1
2.4. Measurement range of the root-mean-square value (RMS) of the vibration velocity, mm/sec	from 0.005 to 50
2.5. The frequency range of the RMS measurement of the vibration velocity, Hz	from 5 to 200
2.6. The limits of permissible absolute error of vibration RMS measurement on the base frequency (80 Hz) and in the operating band, mm/sec	±(0.1 + 0.1*Vи),
	V - the measured value of the MS vibration velocity
2.7. Range of the frequency of rotation measurement, rpm	300 - 30000
2.8. Limits of permissible absolute error of the vibration velocity measurement in the operating band, rpm	±(1 + 0.005*Nи),
	Nи – measured value of the rotor rotation frequency
2.9. Range of the vibration phase shift measurement, angular degrees	from 0 to 360
2.10. Limits of the permissible absolute error of the vibration phase shift measurement, angular degrees	± 1
2.11. Overall dimensions of the measuring unit, mm, max	20016065
2.12. Mass of the measuring block, kg, max	0.9
2.13. Overall dimensions of the vibration sensor, mm, max	252520
2.14. Mass of the vibration sensor, kg, max	0.04
2.15. Overall dimensions of the phase angle sensor, mm, max	1206030
2.16. Mass of the phase angle sensor with the cable, kg, max	0.2
2.17. Service conditions:
▪ air temperature, °C	from 1 to 35
▪ the relative humidity of the air at temperature	25 °C, % max 80
▪ atmospheric pressure, kPa	from 84 to 106.7
2.18. Mean time between failures, hour, min	1000
2.19. Average life, years, min	6

3. DEVICE COMPONENTS AND DELIVERY SET

Basic delivery set of “Balanset-4” device includes measuring block, two sensors of vibration, phase corner sensor, the equipment necessary for the user for main measurement, as well as a CD disk with the software

Measuring block -1
Non Contact phase sensor – 1
Sensors of vibration - 4
Magnetic stand - 1
Electronic scales -1
Case for device transportation -1
Documentation -1
Flash drive with software -1

Balancing set "Balanset-1" →

	+351963457233 Do you have any questions? Ask!
The company OU "Vibromera" is engaged in the development and manufacture of various devices for technical diagnostics and dynamic balancing of industrial equipment.