+372 56630018
Do you have any questions? Ask!
Заказать обратный звонок
The company OU "Vibromera" is engaged in the development and manufacture of various devices for technical diagnostics and dynamic balancing of industrial equipment.

Guarantee

Subject to the rules of consumer transportation, storage and use in the event of failure of the device manufacturer guarantees free appliance repair at his place of manufacture within twelve months from the date of its receipt to the consumer.
Address of the company - manufacturer:

Estonia, Narva linn, Kreenholmi 39v
Phone :+372 56630018

FREE SHIPPING!

When purchasing products through Paypal - free shipping.

Отзывы

Оставить отзыв
Все отзывы (0)
Balancing set “Balkom-4” Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”
Balancing set “Balkom-4” Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”Balancing set “Balkom-4”

Balancing set “Balkom-4”

Balancing set includes: up to 4 sensors of vibration, phase corner sensor, measuring block, and also portable computer - the netbook or the laptop. (The use of the desktop computer is possible if needed).
It can be used when carrying out assembly, installation and repair works to decrease the dynamic loadings operating on bearing knots of machines owing to their unbalance. Thus the operation resource of machines and mechanisms raises significantly.

Цена: 2320 $
Question

1. Destination

Balancing set “Balkom-4” (further “Balancing set” or “Device”) is portable balancing set intended for balancing in one, two, three and four planes of correction of the rotors rotating in own bearings.

Balancing set includes: up to 4 sensors of vibration, phase corner sensor, measuring block, and also portable computer - the netbook or the laptop. (The use of the desktop computer is possible if needed).

It can be used when carrying out assembly, installation and repair works to decrease the dynamic loadings operating on bearing knots of machines owing to their unbalance. Thus the operation resource of machines and mechanisms raises significantly.

Use of a balancing set allows to exclude in many cases need for special balancing machines as balancing of a rotor is carried out in its own bearings without dismantling of the mechanism

If necessary the Balkom-4 balancing set can be also used as a measuring system of the balancing machine.
All process of balancing including measurement, processing and indication information output on size and an installation site of the correction load is carried out in the automated mode and doesn't demand from the user of the additional skills and knowledge which are beyond the present instruction.

Results of all balancing remain in Archive of balancing and can be unpacked in the form of protocols.
Besides balancing the balancing set “Balkom-4” can additionally be used as vibrotachometer allowing to carry out measurement on four channels of the average quadratic value (AQV) of total vibration, RMS of a reverse component of vibration and also to control the frequency of rotor rotation.

Besides, this balancing set allows to output the display of charts of temporary function and a range of vibration on vibrospeed that can be useful at an assessment of technical conditions of the balanced machine.

2. TECHNICAL FEATURES

2.1. Number of the correction planes during balancing1, 2, 3, 4
2.2. Number of channels of the vibration measurement4
2.3. Number of channels of the rotation frequency measurement1
2.4. Measurement range of the root-mean-square value (RMS) of the vibration velocity, mm/secfrom 0.005 to 50
2.5. The frequency range of the RMS measurement of the vibration velocity, Hzfrom 5 to 200
2.6. The limits of permissible absolute error of vibration RMS measurement on the base frequency (80 Hz) and in the operating band, mm/sec±(0.1 + 0.1*Vи),
V - the measured value of the MS vibration velocity
2.7. Range of the frequency of rotation measurement, rpm300 - 30000
2.8. Limits of permissible absolute error of the vibration velocity measurement in the operating band, rpm±(1 + 0.005*Nи),
Nи – measured value of the rotor rotation frequency
2.9. Range of the vibration phase shift measurement, angular degreesfrom 0 to 360
2.10. Limits of the permissible absolute error of the vibration phase shift measurement, angular degrees± 1
2.11. Overall dimensions of the measuring unit, mm, max200*160*65
2.12. Mass of the measuring block, kg, max0.9
2.13. Overall dimensions of the vibration sensor, mm, max25*25*20
2.14. Mass of the vibration sensor, kg, max0.04
2.15. Overall dimensions of the phase angle sensor, mm, max120*60*30
2.16. Mass of the phase angle sensor with the cable, kg, max0.2
2.17. Service conditions:
▪ air temperature, °Cfrom 1 to 35
▪ the relative humidity of the air at temperature25 °C, % max 80
▪ atmospheric pressure, kPafrom 84 to 106.7
2.18. Mean time between failures, hour, min1000
2.19. Average life, years, min6

3. DEVICE COMPONENTS AND DELIVERY SET

Basic delivery set of “Balkom-4” device includes measuring block, two sensors of vibration, phase corner sensor, the equipment necessary for the user for main measurement, as well as a CD disk with the software

  • Measuring block -1
  • Non Contact phase sensor – 1
  • Sensors of vibration - 4
  • Magnetic stand - 1
  • Electronic scales -1
  • Case for device transportation -1
  • Documentation -1
  • Flash drive with software -1
Цена: 2320 $
Question

2017 © «OU "Vibromera"»

+372 56630018
Do you have any questions? Ask!
Заказать обратный звонок
Нужна консультация?